|
Leixen VV-898 Jetstream JT270M Programming Software December 2014 Revised Sept 2016  |
|
This software has been made available as a courtesy to our readers. To the best of our knowledge, this software is correct. We will not be responsible for damage caused by improper loading or use of radio outside its factory specified limits. 136-174 / 400-470 MHz Additional Leixen software can be found at: Leixen Software Page Leixen Software is Very specific as to the Version Number. Due to firmware changes in Firmware 1.07 and newer, the CHIRP software is not compatible at this time. |
|
V1.03 software will not run on a V1.02 radio. It will Not add new features to v1.02 radios or other models. The version number can be found under the serial number. If there is no version number, you probably have v1.02 |
| Leixen VV-898 Software Software v1.02 12.16.2014 |
VV_898_USER_V102.rar VV_898_USER_V102.exe |
Update Notes: 1) Resolves issue of Chan 1 defaulting to 400.000mhz 2) Option added to set clock / calendar in radio 3) Lost channel data in Pos 197-199 corrected |
|
| Leixen VV-898 Software Software v1.03 / v1.04 01.05.2015 |
VV_898_USER_V103.rar VV_898_USER_V103.exe |
Update Note: 1) v1.03 adds a Band Select function. 2) Lost channel data in Pos 197-199 corrected 3) v1.03 & v1.04 are identical. v1.04 is a new batch number only. The software is the same. |
|
| Leixen VV-898S Software Software 1.05 11.05.2015 |
VV_898S_USER_V105.rar VV_898S_USER_V105.exe |
| |
|
| Leixen VV-898ST Software Software 1.07 9.21.2016 |
VV_898S_USER_V107.rar VV_898S_USER_V107.exe |
| NOTE: This software supports the v1.07 radios only. It will not work on older models. |
|
| NOTE: Newer Leixen Software may be available directly from the Leixen Download Center. |
|
| Jetstream JT270 v1.02 10.08.2014 |
JT270M_USER_V102.exe |
| |
|
| Jetstream JT270 v1.03 / v1.04 01.00.2015 |
JT270M_USER_V103.rar JT270M_USER_V103.exe |
| Update Notes: 1) v1.03 adds a Band Select function. |
|
| Jetstream JT270 / JT270MH Software v1.05 05.27.2016 |
JT270MH_USER_V105.rar |
Software Password
When running the software above, you will asked for a
username and password.
Leixen:
Username is ham
Password is 89812345
Jetstream:
Username is jet
Password is 12345678
 |
Software Notes:
- Leixen and Jetstream data files (.lx19) are Not interchangeable.
- Be sure to run the right software for your radio.
- Always start with a Read from Radio to create an initial template for your radio.
|
|
| |
