outdoors hunting camping SHTF GMRS radio communications antenna battery electronics
scanners digital computer software hardware laptop iPad iPhone eBay music radio
MURS V1
Manual
Programming
Frequency Mode vs.
Channel Mode
These two modes have different functions and
often confused. Frequency Mode - Used for a temporary frequency assignment, such as a test frequency or quick field programming.
Channel Mode - Used for selecting preprogrammed channels.
All programming
MUST be done in the
Frequency Mode only. From there you have the option
of assigning the entered data to a specific channel for later access in
the
Channel Mode if desired.
Adding a Transmit Tone
to a MURS Channel
This example is for CTCSS Tone: 141.3Hz
1. Select the desired MURS channel
2. Enter the CTCSS tone
[Menu] 1 3 [Menu]
1 4 1 3 [Menu] [Exit]
or
[Menu] 1 3 [Menu]
[Menu] [Exit]
Adding a Receiver Activation Tone
to any Channel
This example is for CTCSS Tone: 141.3Hz
1. Select the desired MURS channel
2. Enter the CTCSS tone
[Menu] 1 1 [Menu]
1 4 1 3 [Menu] [Exit]
or
[Menu] 1 1 [Menu]
[Menu] [Exit]
