KG-UVD1P v2 |
VHF / UHF
VHF / 220
VHF / 6M |
FCC Part
90 requires that radios imported into the US
after January 1, 2013 must not be capable of Wideband (FM) transmit
on Commercial frequencies.
The above Wouxun radios comply with FCC Part 90 and
require the Newer programming software.
a. These radios are identified
by Serial Numbers starting with F2.
b. The software below is NOT compatible with earlier model Wouxun.
c. This software
will Not change the frequency range of a radio.
d. The use of any software other than
that provided for a specific radio can/will seriously damage the
operation of the radio and Void its Vender/Wouxun warranty.
These radios allow Wideband (FM) and Narrowband (NFM)
operation within the US Ham Bands.
Commercial frequencies (Part 90) are restricted to NFM only and
cannot be field programmed to alter this without specific software
designed to do so.
|
This software is being made available as a courtesy to our readers.
To the best of our knowledge, this Wouxun software is correct.
We will not be responsible for damage caused by improper loading
or use of radio outside its factory specified limits.
The use of any software other than what is
provided below with the intent to alter it's operating range capability
can seriously damage the operation of this radio and is not covered by
Vender/Wouxun warranty.
|
Software for Models
with Serial No. starting with
F2
only.
Verify your radios Serial Number prior to Downloading
|
|
|
KG-UVD1P v2
VHF/UHF VHF/220 VHF/6Mtr |
KG-UVD1P v2.13 setup.zip |
|
|
|
Commercial operation Outside the US.
The Wouxun software below will allow field programming of both FM and
NFM mode throughout the selected range.
This will void the Part 90 compliance of the radio.
Check with your country's restrictions before running this software. |
Software for Models
with F2 Ser. No.
ONLY
Verify the Proper Software for your
handheld prior to Downloading
|
|
|
KG-UVD1P v2
VHF/UHF VHF/220
VHF/6M |
KG-UVD1P
FCC WN 2.5K.zip |
|
|
|
|
Enter the Frequency Range of the Radio
|
|
|
|
|